Wharfedale Pro WLA-210A | Dual 10in - 133dB | Active Line Array Element

Wharfedale Pro WLA-210A  (Wharfedale Pro WD-WLA-210A)

Active Line Array Element

Wharfedale Pro WLA-210A is a dual 10-inch active 2-way line array element designed for compact, high-output touring and installation systems. With integrated Class D amplification, DSP control, and EVO-Fold waveguide technology, it delivers powerful, consistent coverage from a self-powered enclosure.

Wharfedale Pro WLA-210A Competitive Differences

• Dual 10-inch active array element with 133dB maximum SPL
• EVO-Fold waveguide provides controlled 100° x 10° coverage
• Built-in Class D amplification with LF and HF power sections
• DSP-based processing with 8 FIR presets for fast system setup
• RS485 networking enables remote GUI-based tuning and monitoring

Wharfedale Pro WLA-210A Description

The Wharfedale Pro WLA-210A combines advanced acoustic design with active electronics for professional sound reinforcement. It uses two custom Wharfedale Pro 10-inch LF drivers and a 3-inch HF compression driver coupled to the EVO-Fold waveguide for coherent, controlled sound across the listening area.

The internal Class D amplifier provides 700W continuous power for the LF section and 100W continuous power for the HF section, with DSP-based signal processing and 8 FIR presets to support accurate array configuration. Built-in protection includes independent LF/HF RMS limiting, peak limiting, DC protection, thermal shutdown with auto reset, and low line voltage shutdown.

The birch plywood enclosure is finished in black Tough-Tone and includes integrated 3-point rigging for flown or ground-stacked deployments. Balanced XLR input and link connections, USB Type B updating, RJ45 RS485 networking, and powerCON AC input and loop-through connectors make the WLA-210A ready for demanding professional systems.

WLA-210A Features

• Dual 10-inch active 2-way line array element
• Two custom Wharfedale Pro 10-inch LF drivers
• 3-inch HF compression driver with titanium diaphragm
• EVO-Fold waveguide technology
• 100° x 10° nominal HF coverage
• 133dB maximum SPL at 1m
• Class D amplifier design
• DSP-based processing with 8 FIR presets
• RS485 networking for remote control and monitoring
• USB Type B update port
• Integrated 3-point rigging
• Flying and ground deployment options
• Birch plywood enclosure with black Tough-Tone finish
• powerCON AC input and loop-through connectors

WLA-210A Specifications

• Active or Passive: Active
• System Type: Array element
• Configuration: 2-way
• System Continuous Power: LF 700W / HF 100W
• System Peak Power: LF 1400W / HF 200W
• Max SPL: 133dB at 1m
• Frequency Response: 55 Hz - 20 kHz (+/-3 dB)
• Frequency Range: 50 Hz - 20 kHz (-10 dB)
• Driver Brand: Wharfedale Pro
• LF Driver Size: 2 x 10 in
• LF Magnet Material: Ferrite
• LF Frame Material: Aluminum
• LF Voice Coil Size: 2.5 in
• HF Driver Type: Compression driver
• HF Voice Coil Size: 3 in
• HF Diaphragm Material: Titanium
• HF Exit Size: 1.4 in
• HF Power: 90W
• HF Rated Impedance: 8 ohms
• HF Nominal Coverage: 100° x 10°
• Input Connector: Balanced XLR socket
• Link Connector: Balanced pin XLR
• Waveguide Type: EVO-Fold
• Enclosure Material: Birch plywood
• Grille: Steel
• Finish: Black Tough-Tone
• Handles: 4
• Deployment: Flying, ground
• Rigging: Integrated 3-point rigging
• Sensitivity: 101dB, 2.83V / 1m
• Crossover Frequency: 1.5 kHz
• Amplifier Design: Class D
• Signal Processing: DSP based, 8 FIR presets
• Driver Protection: Independent LF/HF RMS, peak limiters, and DC
• Thermal Protection: Amplifier shutdown with auto reset
• DC and Short Protection: Yes
• Power On Protection: Power switch on/off mute
• Limiter Indicator: Red LED
• Signal Indicator: Green LED
• Power/Active Indicator: White LED
• Find Function Indicator: Blue LED
• Input Impedance: Balanced, 10 kΩ
• Input Sensitivity: +4 dBu
• Max Input Level: +18 dBu
• Update Port: USB Type B
• Network: RJ45 RS485
• AC Input Connector: powerCON
• AC Loop Through Connector: powerCON
• Main Power: AC 100-120V / 220-240V, 50/60 Hz automatic
• Power Supply: High efficiency switching mode power supply
• Dimensions: 12.4 x 29.9 x 19.8 in (314 x 760 x 503 mm)
• Rear Height: 7.5 in (190 mm)
• Weight: 87.1 lb (39.5 kg)

What's In The Box

• Wharfedale Pro WLA-210A line array element
• WLA-RH4 rain hood
• User manual